System Integration Design of High-Performance Piezo-Actuated Fast-Steering Mirror for Laser Beam Steering System.

Abstract

This paper presents an innovative piezo-actuated fast-steering mirror (FSM) that integrates control design and system operation to improve the tracking performance of laser beam steering (LBS) systems. The proposed piezoelectric FSM is centered on two pairs of stacked actuators functioning in the tip-tilt direction via novel flexible hinges with strain-gauge sensors for position measurement. The suggested flexible hinge scheme allows the first fundamental resonance mode with the optical mirror to exceed 400 Hz while achieving an actuation range of ±5 mrad. Thus, the design offers a wider mechanical actuation range than conventional piezoelectric FSMs. Moreover, LBS systems that use fast-steering motion controllers should be robust against dynamic disturbances, such as periodic external vibrations. Such disturbances, inherently associated with the operating conditions for LBS systems, typically reduce the stability of the tip-tilt motion. To attenuate the effects of such disturbances, a high-precision control system is necessary for the tip-tilt motion. Therefore, a control method integrating a proportional-integral controller with an adaptive feedforward control (AFC) algorithm is outlined to enhance tip-tilt tracking performance during high-speed scanning, compared with conventional LBS systems. Based on experimental findings, the AFC algorithm boosted control performance under dynamic disturbances, such as sinusoidal vibrations with multiple frequencies.