System identification-based aeroelastic modelling for wing flutter

Abstract

PurposeGround vibration testing (GVT) results can be used as system parameters for predicting flutter, which is essential for aeroelastic clearance. This paper aims to compute GVT-based flutter in time domain, using unsteady air loads by matrix polynomial approximations.Design/methodology/approachThe experimental parameters, namely, frequencies and mode shapes are interpolated to build an equivalent finite element model. The unsteady aerodynamic forces extracted from MSC NASTRAN are approximated using matrix polynomial approximations. The system matrices are condensed to the required shaker location points to build an aeroelastic reduced order state space model in SIMULINK.FindingsThe computed aerodynamic forces are successfully reduced to few input locations (optimal) for flutter simulation on unknown structural system (where stiffness and mass are not known) through a case study. It is demonstrated that GVT data and the computed unsteady aerodynamic forces of a system are adequate to represent its aeroelastic behaviour.Practical implicationsAirforce of every nation continuously upgrades its fleet with advanced weapon systems (stores), which demands aeroelastic flutter clearance. As the original equipment manufacturers does not provide the design data (stiffness and mass) to its customers, a new methodology to build an aeroelastic system of unknown aircraft is devised.Originality/valueA hybrid approach is proposed, involving GVT data to build an aeroelastic state space system, using rationally approximated air loads (matrix polynomial approximations) computed on a virtual FE model for ground flutter simulation.