Abstract
In this paper, a three-coordinate dynamic synchronous tester system based on STM32 is developed. STM32F103C8T6 chip is used as the control system. The control system mainly consists of three modules: motion control module, magnetic encoder measurement module and displacement data collection module. The STM32 main control controls the three-axis stepper table to move according to the specified instructions, the AS5600 magnetic encoder is used to measure the data of the three-way stepper motor, and the TCA9548A module is used to expand the IIC channel and realize the communication between the STM32 and the host computer, and the data is transmitted to the host computer through serial communication. The test results show that the system meets the needs of the existing domestic industrial level, the cost is moderate, the performance is reliable and the operation is simple, and meets the practical application requirements.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
