Synthetic aggregates from combustion ashes using an innovative rotary kiln

Abstract

This paper describes the use of a number of different combustion, ashes to manufacture synthetic aggregates using an innovative rotary ‘Trefoil’ kiln. Three types of, combustion ash were used, namely: u • incinerated sewage sludge ash (ISSA); • municipal solid waste incinerator bottom ash (MSWIBA-referred to here as BA); and • pulverised fuel ash (Pfa) The fine waste ash fractions listed above were combined with a binder to create a plastic mix that was capable of being formed into ‘green pellets’. These pellets were then fired in a Trefoil kiln to sinter the ashes into hard fused aggregates which were then tested for use as a replacement for the natural coarse aggregate in concrete. Results up to 28 days showed that these synthetic aggregates were capable of producing concretes with compressive strengths raging from 33 to 51 Mpa, equivalent to between 73% and 112% of, that of the control concrete made with natural aggregates.