Abstract

One-dimensional (1-D) zinc oxide (ZnO) nanostructures, such as ZnO nanowires and nanorods, have in recent years attracted a lot of attention due to their many unique properties and possibility that can be applied to various nanoscale functional devices. In this study, ZnO nanowires have been successfully synthesized on Ti/glass substrates by an DC magnetron sputter deposition technique. Deposition of ZnO using this technique generally leads to the formation of ZnO thin film but not of nanowire. So prior to the ZnO deposition, a Cu labyer was prepared on the Ti/glass substrate using an electroless plating method under different conditions. X-ray diffraction (XRD) analysis confirmed that the ZnO nanowires with wurtzite structures have high crystal quality and are c-axis orientated. Scanning electron microscopy (SEM) showed the diameters of nanowires normally range from 60 to 150 nm and their lengths reach 20 μm. Photoluminescence (PL) measurements were adopted to analyze the optical properties of the nanowires. The existence of an electroless Cu layer is critical for the growth of the ZnO nanowires. In addition, the effect of the Cu deposition conditions on the diameters and lengths of the ZnO nanowires is discussed in details.

Highlights

  • Trước khi phủ zinc oxide (ZnO), một lớp xúc Cu lên đường kính và chiều dài của các dây tác đồng (Cu) được phủ trên đế Ti/thủy tinh nano ZnO. bằng phương pháp mạ hóa học với các điều Từ khóa : ZnO nanowire, ZnO nanorod, cấu trúc nano một chiều

  • One-dimensional (1-D) zinc oxide (ZnO) nanostructures, such as ZnO nanowires and nanorods, have in recent years attracted a lot of attention due to their many unique properties and possibility that can be applied to various nanoscale functional devices

  • ZnO nanowires have been successfully synthesized on Ti/glass substrates by an DC magnetron sputter deposition technique

Read more

Summary

TÓM TẮT

Trong những năm gần đây, vật liệu ZnO kiện mạ khác nhau. Kết quả phân tích phổ với các cấu trúc một chiều như dây nano nhiễu xạ tia X (XRD) cho thấy các dây nano ZnO, thanh nano ZnO... đang thu hút sự ZnO định hướng theo trục c và có chất lượng quan tâm của nhiều nhà khoa học do ZnO có tinh thể cao. Kính từ 60 đến 150 nm và chiều dài có thể Trong nghiên cứu này, dây nano ZnO được đạt đến 20 μm. Tính chất quang của các dây tổng hợp thành công trên đế Ti/thủy tinh bằng nano ZnO được khảo sát bằng phổ quang phương pháp phún xạ magnetron DC. Pháp phún xạ sẽ không dẫn đến sự hình Ngoài ra, nghiên cứu này còn khảo sát chi thành dây nano mà hình thành màng mỏng tiết sự ảnh hưởng của các điều kiện mạ lớp ZnO. Trước khi phủ ZnO, một lớp xúc Cu lên đường kính và chiều dài của các dây tác đồng (Cu) được phủ trên đế Ti/thủy tinh nano ZnO. Bằng phương pháp mạ hóa học với các điều Từ khóa : ZnO nanowire, ZnO nanorod, cấu trúc nano một chiều Trước khi phủ ZnO, một lớp xúc Cu lên đường kính và chiều dài của các dây tác đồng (Cu) được phủ trên đế Ti/thủy tinh nano ZnO. bằng phương pháp mạ hóa học với các điều Từ khóa : ZnO nanowire, ZnO nanorod, cấu trúc nano một chiều

GIỚI THIỆU
VẬT LIỆU VÀ PHƯƠNG PHÁP
KẾT QUẢ VÀ THẢO LUẬN
KẾT LUẬN
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call