Abstract
Silicon nanoparticles are the focus of attention thanks to their potentialities in advanced applications such as new batteries, photovoltaic cells and so on. The need to porous silicon is thus rising and will follow the same trend. In this work, highly porous nanostructured silicon is synthesized via Self-propagating high-temperature synthesis (SHS) route. Microstructural and phase analyses show that the employed technique is capable of producing a three-dimensional porous silicon which can act as a skeleton for embedding lithium ions and therefore, resisting large volume expansions arising during lithiation phase. Considering the fact that the wave front experiences high temperatures (above 1900°C) which can result in nanoparticles’ sintering, and in order to improve the porosity level, ammonium nitrate is used as a neutral additive at Mg/SiO2/NH4NO3 (2.4:1:0.1) molar ratio. The influence of nitrate addition on the final microstructure is studied through comparing salt-added samples with bare ones. Results show that ammonium nitrate can hinder the agglomeration of silicon nanoparticles during the progress of combustion wave thus affecting the specific surface area significantly (138.3 m2 g-1 as compared to for the 43.8 m2 g-1 for the reference sample which lacks NH4NO3). On the other hand, it was found that the added salt does not affect the product purity as examined through X-ray diffraction analysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.