Abstract
In the present study, acid–base blend membranes are synthesized to imply as electrolytes in polymer electrolyte membrane fuel cells (PEMFCs). Poly(bis(phenoxy)phosphazene) (POP) is sulfonated with sulfuric acid to impart the ionic conductivity and then blended with sulfonated poly(ether ether ketone) (sPEEK). The blend membranes are fabricated by varying the sulfonated poly(bis(phenoxy) phosphazene) (sPOP) content from 2 to 4wt.% in relation to sPEEK. The strong hydrophobic backbone of POP improves the mechanical strength of the membrane which is critical for the long term operation of PEMFCs. SAXS analysis suggests the change and enhanced dimension of ionic clusters in sPOP-sPEEK blend membrane in comparison with pristine sPEEK. Hydrophobic and hydrophilic phase distinction in the blend is determined by AFM analysis. Blend membranes exhibit higher ionic conductivity than pristine sPEEK membrane due to the acid–base interactions between sPEEK and sPOP. When subjected to cell polarization, blend membranes of sPOP-sPEEK attain peak power density of 935mWcm−2 in PEMFCs which is on par with the peak power density observed for commercial Nafion-212 membrane. Apart from its higher performance, the sPOP (3wt.%)-sPEEK blend also shows low fuel crossover and comparable stability to Nafion-212 membrane under cell operation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
