Abstract
A synthetic method for preparing submicrometer-sized titania particles is proposed, which is based on hydrolysis of titanium alkoxide with the use of a cosolvent and an amine catalyst for alkoxide hydrolysis. The preparation was performed with different amines of ammonia, methylamine (MA), and dimethylamine (DMA) in different solvents of ethanol/acetonitrile, ethanol/methanol, ethanol/acetone, ethanol/acetonitrile, and ethanol/formamide for 0.1–0.3 M water and 0.03 M titanium tetraisopropoxide (TTIP) at temperatures of 10–50 °C. The use of the ethanol/acetonitrile solvent with MA was required for preparing monodispersed, spherical particles. The number average of the titania particle sizes and their coefficient of variation were varied from 143 to 551 nm and from 5.7 to 20.6%, respectively, with reaction temperature and concentrations of water and MA. Colloidal crystals of titania particles fabricated with a sedimentation method revealed reflection peaks attributed to Bragg's diffraction. Annealing at 100–1000 °C led to shrinkage and crystallization of titania particles followed by an increase in the refractive index of titania particles.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
