Synthesis of some new 2‐[(2,3‐dihydroinden‐1‐ylidene) hydrazinyl]‐4‐methylthiazole derivatives for simultaneous dyeing and finishing for UV protective cotton fabrics

Abstract

AbstractSeveral 2‐[1‐(1,2‐dihydroinden‐3‐ylidene) hydrazono]‐5‐aryldiazo‐4‐methyl‐1,3‐thiazoles were synthesized by reaction of 1‐(1,2‐Dihydroinden‐3‐ylidene) thiosemicarbazide with different hydrazonyl chlorides. The products are water insoluble and UV absorbers, expressed UPF‐rating values, and their H2O/DMF solutions were used in simultaneous dyeing and resin finishing of cotton fabrics. Results obtained show that finishing of cotton samples in presence of any of that dyes, irrespective of dye concentration, brings about an improvement in percent nitrogen, wrinkle recovery angle (WRA), dyeability, and UV protection rating values along with slight decrease of tensile strength (TS) compared with the untreated samples. Irrespective of dye structure, increasing the dye concentration from 0.5 and up to 1.7% results in an improvement in the percent nitrogen, TS and a remarkable improvement in both the dyeability, UPF‐rating values along with slight decrease in WRA and lower fastness properties of the treated fabrics. The treated fabrics was characterized using energy dispersive X‐ray analysis indicating the entrapped dye within the fabric structure. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009