Abstract
Iron-containing catalysts have been known to be useful in assisting the Fischer-Tropsch (FT) reaction for synthesizing hydrocarbons. However, it has been well recognized that iron catalyst are not stable during the reaction but converted into iron carbides. It is thus important to understand the role of the iron carbides in the catalytic reaction of the FT-synthesis. It has been found difficult to produce iron carbide nano-particles as a single phase, because iron carbide phases are only metastable under 1 atm pressure. Iron carbide bulk particles prepared so far are often contaminated with metallic iron, iron oxides and free carbon. In this study, we investigate the synthesis of iron carbide nano-particles using CO{sub 2} laser pyrolysis technique. We show that this technique is successful in synthesizing {alpha}-Fe, Fe{sub 3}C and Fe{sub 7}C{sub 3} nano-particles in their single phase with sizes in the range of 5--20nm. In particular, we have produced for the first time the Fe{sub 7}C{sub 3} which has been known to exist but unable to be produced as a single phase. Furthermore, it is interesting that Fe{sub 5}C{sub 2} which has carbon and iron ratio between Fe{sub 3}C and Fe{sub 7}C{sub 3}, is not seen in any run of more » our synthesis. « less
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.