Abstract

Metal-organic framework MIL-53(Al) was synthesized by a solvothermal method using aluminium nitrate as the aluminium source and 1,4- benzenedicarboxylic acid (H2BDC) as the organic ligand. The structure of MIL-53(Al) was characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). The catalytic activity and recyclability of MIL-53(Al) catalyst were evaluated based on the Paal-Knorr reaction between aniline and acetonylacetone. The reaction conditions were optimized and the results showed that the MIL-53(Al) catalyst exhibited good catalytic activity and recyclability based on the PaalKnorr reaction. With the molar ratio of MIL-53(Al) catalyst of 10 mol %, the molar ratio of aniline and acetonylacetone of 1:1.2, and without solvents, the conversion of aniline could reach 100 % and the selectivity of 2,5-dimethyl-1-phenyl-1H-pyrrole has high yield (95-100 %) after 2 hours by ultrasound activation. The MIL-53(Al) catalyst can be reused five times without significant degradation in the catalytic activity.

Highlights

  • TÓM TẮTMIL-53(Al) được tổng hợp bằng phương pháp và khả năng tái sử dụng dựa trên phản ứng Paaldung nhiệt (solvothermal method) sử dụng aluminum Knorr

  • Synthesis of pyrroles catalyzed by MIL-53(Al) via Paal-Knorr reaction under mild condition

  • The catalytic activity and recyclability of MIL-53(Al) catalyst were evaluated based on the Paal-Knorr reaction between aniline and acetonylacetone

Read more

Summary

TÓM TẮT

MIL-53(Al) được tổng hợp bằng phương pháp và khả năng tái sử dụng dựa trên phản ứng Paaldung nhiệt (solvothermal method) sử dụng aluminum Knorr. Hoạt tính và khả năng tái cao (95-100 %) sau 2 giờ thực hiện phản ứng bằng sử dụng của xúc tác MIL-53(Al) được khảo sát trên phương pháp kích hoạt siêu âm. Dựa trên những hoạt tính sinh học của các hợp chất này, đã có nhiều công trình nghiên cứu để phát triển các cấu trúc này như: phản ứng Hantzsch vào năm 1890 [4], pyrrole được tổng hợp từ αchloromethyl ketone với β-ketonester và dung dịch NH3; phản ứng Knorr vào năm 1884 [5], với việc tổng hợp pyrrole từ phản ứng giữa α-aminoketone (được tổng hợp từ α-haloketone và dung dịch NH3) và β-ketonester; hay phản ứng Paal-Knorr vào năm 1885 [6], với việc sử dụng hợp chất 1,4-dicarbonyl chuyển thành pyrrole từ phản ứng giữa amine bậc một hoặc dung dịch NH3. Đây là lần đầu tiên MIL-53(Al) được sử dụng làm xúc tác cho phản ứng Paal-Knorr

Hóa chất
Quy trình thực hiện phản ứng tổng quát
Khảo sát ảnh hưởng của các loại xúc tác khác nhau
Xúc tác
Khảo sát ảnh hưởng tỷ lệ mol của xúc tác
Khảo sát ảnh hưởng của amine bậc một
Sản phẩm
Findings
KẾT LUẬN
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call