Abstract
Thermally induced graft copolymerization of sodium styrene sulfonate (SSS) with ozone-preactivated poly(vinylidene fluoride) (PVDF) produced a PVDF-g-PSSS copolymer. Sulfonic acid proton exchange membranes (PVDF-g-PSSA) were then prepared using the solvent evaporation method. They were investigated with a Fourier transform infrared spectrometer and an X-ray diffractometer. The results indicate that the proton conductivity of the prepared membranes reached 0.046S/cm when the degree of grafting was 50.52%. Results from a quartz crystal microbalance with dissipation monitoring indicated that the PVDF-g-PSSA membrane showed superior antifouling performance to that of a Nafion membrane. The performance of the prepared membrane in dual-chamber microbial fuel cells was also evaluated and compared with that of Nafion 117. Although the microbial fuel cell with the prepared membrane generated lower maximum power density (106.7mW/m2) than that with Nafion 117 (132.0mW/m2), it was more cost-effective because of its lower price and more simplified preparation process. In addition, its chemical oxygen demand (COD) removal (85%) was much higher than that of Nafion 117 (74%).
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
