Abstract
For developing promising gas sensing materials, constructing porous and heterojunction structures within the whole semiconductor oxide composites was an ideal strategy. However, it was always difficult because there existed grain boundaries. Herein, the pre-synthesized tiny SnO2 nanospheres could be evenly combined with ZnFe2O4 to form the ZnFe2O4/SnO2 (ZFO/SNO) composite with porous core-shell spheres structure via a simple solvent thermal reaction followed by the calcination treatment. Molar ratios of Zn to Sn were adjusted, and the resultant porous ZFO/SNO composites with different morphology were obtained, and their gas sensing properties were investigated and compared. The result indicated that the porous ZFO/SNO composite with a Zn to Sn ratio of 1:0.7 (ZFO/SNO-0.7) showed much better acetone sensing performance than that of bare porous ZnFe2O4 spheres and other ZFO/SNO composites. It exhibited a high response value of 120 to 100 ppm of acetone at 210℃ with good stability, and the detection limit can reach 0.1 ppm. The remarkable sensor performance of the porous ZFO/SNO-0.7 composite was attributed to its rich heterojunctions, porous structure and small nanoparticle size.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
