Abstract

Polyimide cross-linked silica gels with different weight percentages of solid precursors and different volumes of MTMS were prepared by using bis(trimethoxysilylpropyl)amine (BTMSPA) cross-linked polyamide acid, synthesized by 4,4′-oxydianiline (ODA), p-phenylenediamine (PPDA) and biphenyl-3,3′,4,4′-tetracarboxylic dianhydride (BPDA), compounding with a silica network which was hydrolysed by MTMS, then supercritically dried to produce a hybrid aerogel. The obtained aerogels exhibit striking properties such as low density (as low as 90 mg cm−3), a large surface area (up to 582 m2 g−1), lower shrinkage (up to 20%) and are more easily accessible than those previous reported. Formulations made of 8.7% and 11.72% solid precursors never collapsed under compression. Furthermore, the latter shows the maximum modulus (up to 17 MPa) and a higher sound absorption coefficient (more than 0.8) with a thickness of 3 cm in a specific range of frequencies.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call