Synthesis of Nickel-Based Nanoparticles by Pulsed Laser Ablation in Liquids: Correlations between Laser Beam Power, Size Distribution and Cavitation Bubble Lifetime

Abstract

Pulsed laser ablation in liquids (PLAL) is a colloidal synthesis technique attracting significant interest from the scientific community due to the quality of the nanoparticles being produced. In this type of synthesis protocol, the cavitation bubble plays a vital role during the synthesis of nanoparticles. This work studied the effect of the laser beam power on cavitation bubble lifetime. Three different laser beam power values (5.8 W, 7.5 W and 10.5 W) were used to irradiate a pure nickel target in de-ionized (DI) water to synthesize nickel-based nanoparticles. The optimal repetition rate maximizing the production of nanoparticles was determined by atomic emission spectroscopy for each laser beam power. It was determined that the optimal repetition rate increased exponentially with laser beam power, while the cavitation bubble lifetime decreased logarithmically with the laser beam power. Moreover, the effect of the laser beam power on the cavitation bubble lifetime also had an effect on the size distribution of the nanoparticles being produced; the smallest size distribution was obtained at the highest laser beam power.