Synthesis of nanocrystalline SnO2 in supercritical water

Abstract

Nanocrystalline SnO2 was synthesized in supercritical water at 385–415°C and 30 MPa (38–106 s residence time) in a tubular flow reactor from an aqueous solution of 0.1–0.4 M SnCl4. The conversion rate was between 53 and 81%, but increased to 97.8% when 0.1 M NaOH was added. Nanoparticles were analyzed by a series of independent analytical techniques, including TEM, Raman, XRD, SEM, EDX and FT-IR. The initial size of the particles was about 3.7 nm. After calcination at 450°C for 2 h, the particle size increased to 4 nm. The particles were of low crystallinity, as indicated by the weak Raman and XRD signals. All particles were composed of Sn and O, as verified by the EDX spectra. The crystals were tetragonal, as confirmed by the weak XRD spectrum. After calcination at 600°C for 10 h, the particle size increased to 9 nm, while high crystallinity was confirmed by Raman and XRD analyses. All the crystals had the same structure, as indicated by TEM electron diffraction patterns. Using this one-step supercritical water process, nanoparticles of SnO2 can be conveniently produced continuously in a flow reactor in less than 2 min.