Abstract
Nano calcium carbonate particles have a wide range of industrial applications due to their beneficial properties such as high porosity and high surface area to volume ratio and due to their strengthening the mechanical properties of plastics and paper. Consequently, significant research has been done to deliver a new approach for the synthesis of precipitated nano calcium carbonate by using a carbonation process through a closed loop reactor. Both the experimental and the instrumental parameters, i.e. the CO2 flow rate, the concentration of the starting materials (Ca(OH)2 and CaO), the pH, the orifice diameter, etc., were investigated. The carbonation efficiency was increased due to the diffusion process involved in the loop reactor. The particle size was affected by the CO2 flow rate, reaction time, and orifice diameter. Finally, precipitated nano calcite calcium carbonate (50 to 100 nm) was synthesized by optimizing all the experimental and the instrumental parameters. The synthesized precipitated nano calcium carbonate was characterized by using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy. This study has proved that the carbonation efficiency can be enhanced for a short time by using a loop reactor and that the carbonation process was more energy efficient and cost effective than other conventional methods.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.