Synthesis of iron oxide nanoparticles encapsulated poly(styrene‐co‐4‐vinyl pyridine) nanocomposites for column adsorption and photocatalytic degradation of para nitrophenol from water

Abstract

AbstractStyrene (St), 1,4 vinyl pyridine (4VP) monomers and divinyl benzene (DVB) monomer‐cum‐crosslinker at different molar ratios were subjected to emulsion polymerization in the presence of FeCl2, 6H2O/FeCl3⋅4H2O followed by the treatment with an aqueous ammonia solution to produce several iron oxide nanoparticles (IONs) impregnated crosslinked copolymer composites. The resulting polymer metal nanocomposites (PMNCs) were characterized by FTIR, proton and 13C NMR, UV–visible spectroscopy, XRD, XPS, DLS, magnetic properties, SEM and TEM. The PMNCs were used for batch and column adsorption and photocatalytic degradation of p‐nitrophenol (PNP) from water. The PMNC4 composite prepared with an styrene:4VP molar ratio of 5:1 (16.7 mol% 4VP), 4 wt.% DVB crosslinker and 0.025/0.05 molar ratios of Fe(II)/Fe(III) salts leads to an optimum batch equilibrium adsorption (qe, mg/g)/removal% of 496.36/99.3 PNP from aqueous PNP of concentration 100 mg/L. The same composite showed an equilibrium PNP adsorption (qe) of 114.2 mg/g polymer and a removal% of 26.8 for an inlet feed concentration (Ci, mg/L)/flow rate (Qt, mL/min)/bed height (h, mm) of 100/30/30 in a fixed bed. The PMNC4 polymer showed a photodegradation efficiency of 98% with a 1st order rate constant of 0.029 min−1 after 70 min of degradation of 100 mg/L PNP in solar light.Highlights Copolymer network of styrene, 4 vinyl pyridine and DVB were synthesized. Iron oxide nanoparticles were introduced into the network in‐situ during synthesis. The metal polymer nanocomposites (PMNCs) were characterized. Synthesis parameters were optimized with respect to batch adsorption of PNP. PMNCs showed excellent fixed bed adsorption and photocatalytic degradation of PNP.