Synthesis of HZSM-5@activated carbon for improving aromatic production from catalytic pyrolysis of biomass

Abstract

HZSM-5 widely used for the catalytic pyrolysis of biomass exhibits the drawbacks of high diffusion resistance and large coke production. To effectively enhance the catalytic efficiency and alleviate the coke deposition, a novel promising catalyst, HZSM-5 coated activated carbon (HZSM-5@AC), was prepared for the first time for in-line upgrading the pyrolysis products of soybean straw. Various catalysts including HZSM-5, activated carbon, and the HZSM-5@AC catalysts with different HZSM-5 to activated carbon mass ratios were characterized. The results showed that the HZSM-5 was successfully coated on the surface of activated carbon and the addition of activated carbon introduced a mesoporous structure and more acidic sites to the catalyst. The catalytic performance on the biomass conversion showed that the catalyst with HZSM-5-to-activated carbon mass ratio of 18:5 (18HZSM-5@5AC) had the highest catalytic efficiency on the conversion of biomass into aromatics with a selectivity of 99.5%, including 75.68% of benzene, toluene, and xylenes (BTX) with a yield of 74.68 mg/g. Moreover, a possible pathway for HZSM-5@AC catalyzed biomass pyrolysis was proposed through analyzing the conversion of model compounds. The catalyst cycling experiments demonstrated the higher stability of HZSM-5@AC than the parent HZSM-5 and activated carbon. TG, FTIR, Raman and SEM showed that the spent HZSM-5@AC was hardly structurally changed with a low coke yield of 0.08%. However, the spent HZSM-5 was partly structurally deactivated by large aromatic ring systems with a coke yield of 3.74%. SEM results also showed that a large amount of polymerized material encapsulated the surface of the spent HZSM-5.