Abstract
The Si and Al in municipal solid waste incineration fly ash (MSWI FA) can be utilized for zeolite fabrication, which can improve the application value of the products. This study focuses on the fabrication of zeolite from MSWI FA by microwave-assisted hydrothermal (MH) treatment. The effects of magnetic stirring time, Na2SiO3 dosage, MH time, and NaOH solution concentration on the crystallization of zeolite NaP1 from MSWI FA are systematically analyzed. The synthetic products are analyzed through spectroscopic and mineralogical methods. The results show that zeolite NaP1 with high crystallinity (51.68 %) can be fabricated by magnetic stirring and MH treatment, and the cation exchange capacity (CEC) of the product can reach a value of 2.58 meq/g, which is approximately 133 times that of the CEC of MSWI FA. The Si/Al ratio plays a decisive role in the zeolite NaP1 synthesis, and a Na2SiO3 dosage of 30 wt% is adopted for zeolite NaP1 fabrication. A NaOH concentration of 1 M is sufficient for zeolite NaP1 synthesis. Additionally, the zeolite NaP1 content is found to obviously increase with increasing MH time from 0.5 h to 2 h. To demonstrate the feasibility of the method provided in this study, the optimal experimental condition is employed for various MSWI FAs, and zeolite NaP1 and analcime are fabricated successfully. The leachability of heavy metals for the synthetic products was evaluated, which met the requirements for pollution control. The BET surface area and total pore volume of zeolite NaP1 fabricated at optimal condition are 61.42 m2/g and 0.44 cm3/g, respectively. The adsorption capacity of zeolite NaP1 for Cu2+ ion and methylene blue are determined to be 84.65 mg/g and 84.55 mg/g, respectively, indicating zeolite NaP1 is a potential adsorbent for cation ion and dyes. This study provides an environmentally friendly scheme for the utilization of MSWI FA.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
