Abstract
Silicon carbide (SiC)-reinforced calcium (Ca)-α-sialon ceramic composites were synthesized using nano-sized precursors and spark plasma sintering at 1500 °C for 30 min by adding 10, 20 and 30 wt % of SiC particles into the sialon matrix. Almost complete densification was achieved for all processed samples. The second-phase SiC particles were found to be homogeneously dispersed in the α-sialon matrix. The effect of the amount of loaded SiC on the mechanical properties of the ceramic composites was studied. A remarkable combination of hardness and toughness values, specifically 24.53 GPa (HV10) and 11.0 MPa m1/2, respectively, was obtained for the composite ceramic containing 30 wt% SiC, whereas hardness and fracture toughness values of only 21.1 GPa (HV10) and 7.3 MPa m1/2, respectively, were obtained for the monolithic α-sialon ceramic. The increase in fracture toughness was fairly attributed to the crack deflection, crack bridging and grain pullout mechanisms caused by the finely dispersed SiC particles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
