Abstract
Water pollution caused by chromium released from tannery is a serious concern to the environment and public health. Chromium removal from tannery effluent is a crying need before discharging to the surface water. In this study, acrylic acid-grafted sawdust was prepared by Tectona grandis sawdust grafting with acrylic acid employing gamma irradiation in the presence of air and Mohr's salt. It was treated with NaOH and the characterization of surface morphology and functional groups of modified sawdust was studied by SEM and FTIR.. The effects of solution pH, adsorbent dosage, adsorption time, and initial Cr(III) ion concentration were investigated by batch sorption studies. The process was found to be pH, temperature and concentration dependent. Langmuir and Freundlich isotherms were applied to realize the adsorption process in depth, and it was found that the Langmuir isotherm model fitted well with experimental data (R2 value of 0.983). The maximum monolayer adsorption capacity of acrylic acid-grafted sawdust for Cr(III) from aquous solution was found to be 21.55 mg g-1 at 25 °C. Pseudo-first-order and pseudo-second-order kinetic models were employed to analyze the kinetics of the process, and it was found that the experimental process followed the pseudo-second-order kinetic model, i.e. chemisorption. This study revealed that acrylic acid-grafted sawdust has a decent potential for the removal of Cr(III) from tannery effluents.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have