Synthesis of diesel‐like fuels using waste cooking oil and waste polyethylene via Co‐pyrolysis process

Abstract

AbstractThis study investigated the effects of different proportions of waste polyethylene (WP) and waste cooking oil (WCO) on the chemical and physical properties of the resulting co‐pyrolysis oil produced in an indigenously developed laboratory‐scale fixed bed batch‐type reactor. The proportion of WCO was altered in increments of 10% from 10% to 90%, and correspondingly, the proportion of WP was adjusted from 90% to 10% (by weight). The highest liquid fuel yield, reaching 70.9% by weight, was achieved using a 40:60 ratio of WCO to WP (W40P60) at a constant heating rate of 12°C and a temperature of 500°C. The obtained fuel exhibits promising properties, including a high calorific value (max HHV around 45.63 MJ/kg) and other advantageous properties such as low viscosity, low oxygen and nitrogen content, and absence of sulfur. Fourier‐transform infrared spectroscopy (FTIR) and gas chromatography–mass spectroscopy (GCMS) were examined on the resulting liquid fuel. The GC–MS spectra predominantly display alkanes, constituting approximately 41% by weight, and alkenes, making up roughly 20% by weight. These analyses revealed properties akin to commercial diesel, emphasizing the potential of waste cooking oil and waste polyethylene proportions in liquid diesel like fuel production.