Abstract
Exfoliated polyaniline–graphite (PAniG) nanocomposite (NC) with high electrical conductivity was synthesized via in situ polymerization of aniline in the presence of intercalated graphite in ScCO2 medium. Ammonium peroxydisulfate (NH4)2S2O8 (APS) was used as an oxidizing agent. The morphology and structure of synthesized PAniG NC was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FTIR). Synthesized PAniG NC was used to modify the barrier properties and cathodic protection behavior of a commercial zinc rich epoxy primer (c-ZRP) on low carbon steel (CS) substrate. The protective properties of original and modified ZRPs (m-ZRP) were investigated using open circuit potential (OCP) measurements and electrochemical impedance spectroscopy (EIS) method. It was found that after immersing coated CS for 365 days in 3.5% sodium chloride solution the OCP for m-ZRP remained at the cathodic protection region (lower than −0.86V/SCE), while for c-ZRP it was passed out of protection region after immersing 100 days. EIS analysis revealed that in m-ZRP the zinc consumption and formation of zinc oxide was delayed and after 100 days of immersion, resistance of c-ZRP and m-ZRP reaches to 2.48×104Ω and 2.56×103Ω, respectively. Results revealed that the performance of m-ZRP improved due to the barrier properties of PAniG NC which added to the primer.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
