Synthesis of Carbide Lime Waste Derived Base Catalyst (KF/CLW-Fe3O4) for Methyl Ester Production: An Optimization Study

Abstract

In this paper, solid base catalyst KF/CLW-Fe3O4 was prepared from carbide lime waste, primarily calcium hydroxide with tiny amounts of carbonate and; the catalyst was used in the optimization study on the methyl ester production. The new strong base catalyst was synthesized by chemical impregnation. This catalyst was characterized by Hammett indicator analysis, Brunauer, Emmett, and Teller (BET), scanning electron microscope (SEM), X-ray diffraction (XRD) and temperature-programmed desorption (TPD) of carbon dioxide. The catalyst was further used to catalyzed the transesterification reaction to produce methyl ester. Taguchi method was used to assess the impact of catalyst at different intervals of reaction parameters, including reaction time, methanol to oil ratio, and catalyst loading. A mixed level of orthogonal array design with L9, analysis of variance (ANOVA) and signal to noise ratio were used to determine parameters that significantly impact the palm oil transesterification reaction. High methyl ester conversion was attained, and the catalyst can be easily separated and reused. KF/CLW-Fe3O4 has great potential to be used to produce methyl ester because of its high catalytic activity and environmental friendliness. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).