Abstract

The enzymatic synthesis of short-tailed alkyl glucosides is generally carried out in an aqueous-organic biphasic reaction medium with a rather low fatty alcohol concentration in the aqueous phase (where the synthesis occurs). Thus, hydrolytic reactions have a significant impact on the synthesis performance. Given this background, the use of acetone as cosolvent was studied for the synthesis of butyl-β-galactoside with Aspergillus oryzae β-galactosidase. The liquid–liquid equilibrium of the reaction mixture components (acetone/1-butanol/aqueous solution) was determined and the single- and two-phase regions were defined at 30, 40, and 50°C. It was observed that the liquid–liquid equilibrium of the ternary system acetone/1-butanol/water differs significantly from the one obtained using an aqueous solution (50 mM McIlvaine buffer pH 4.5; 5 g L–1) instead of water. This is mainly because of the salting-out effect of the buffer; nevertheless, the presence of lactose also altered the equilibrium. Having this in mind, the effects of temperature (30 and 50°C) and reaction mixture composition were assessed. Three general conditions were evaluated: single-phase ternary system (30% acetone), two-phase ternary system (10% acetone) and two-phase binary system (0% acetone). Acetone had a deleterious effect on enzyme stability at 50°C, leading to low reaction yields. However, no enzyme deactivation was detected at 30°C. Moreover, a reaction yield of 0.98 mol mol–1 was attained in the 30/50/20% (w/w) mixture of acetone/1-butanol/aqueous solution. This very high yield can be explained by the huge increase in the concentration of 1-butanol and the reduction of water activity. The synthesis was carried out using also the β-galactosidase immobilized in glyoxal-agarose and amino-glyoxal-agarose, and by aggregation and crosslinking. In the case of agarose-derived catalysts, two average particle diameters were assessed to evaluate the presence of internal mass transfer limitations. Best yield (0.88 mol mol–1) was obtained with glyoxal-agarose derivatives and the particle size had non-effect on yield. The chemical structure of butyl-β-galactoside was determined by NMR and FT-IR.

Highlights

  • Alkyl-glycosides (AGs) are a new family of non-ionic surfactants that stand out from conventional non-ionic surface agents for being biodegradable, non-toxic and hypoallergenic (Rather and Mishra, 2013)

  • The combined effect of three mass percentages of aqueous solution (20, 40, and 60%) and three mass percentages of acetone (0, 10, and 30%) were experimentally evaluated, the remaining mass percentages corresponding to 1-butanol. These conditions were chosen considering the results shown in section “Characterization of the Ternary System Acetone/1Butanol/Aqueous Solutions.”

  • The synthesis of butyl-β-galactoside was conducted at three general conditions: single-phase ternary system, two-phase ternary system and two-phase binary system (0% acetone)

Read more

Summary

Introduction

Alkyl-glycosides (AGs) are a new family of non-ionic surfactants that stand out from conventional non-ionic surface agents for being biodegradable, non-toxic and hypoallergenic (Rather and Mishra, 2013). They are synthesized from renewable raw materials, so they are a sound replacement for nonyl-phenol and its ethoxylated-derivatives (United States Environmental Protection Agency, 2012). Starchem Enterprises (China) has started the bulk production of butyl and hexyl-glucosides, marketing both as solubilizers in hard surface cleaning, especially in beer bottle cleaning and metal anti-corrosion cleaning (Starchem Enterprises Limited, 2019) This renewed interest in short-tailed AGs production opens up an opportunity for using biocatalysis and underutilized carbohydrates in the synthesis of ecofriendly surfactants

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call