Abstract

Glucose electro-oxidation in an alkaline media was investigated using an electrode composed of carbon paste and sugarcane bagasse activated carbon (SBAC). The SBAC was prepared using an easy, affordable, and environmental friendly process. The porous activated carbon was produced using sugarcane bagasse through a pre-treatment process that involved carbonization at 650 °C and K2CO3. X-ray diffraction (XRD) was used to observe the formation of carbon crystallites during activation at higher temperatures. The Fourier-transform infrared (FTIR) spectrum shows functional groups that are present in the carbon material. The carbon sample's morphology was evaluated using scanning electron microscope (SEM). The surface roughness was studied using atomic force microscopy (AFM). Porous activated carbon derived from sugarcane bagasse was carefully mixed into electrode components such as graphite powder and mineral oil for glucose (GLS) detection. For precise GLS detection, the SBACs were employed as non-enzymatic electrochemical sensor probes in their as-prepared condition. According to the electrochemical experiments, the constructed sensor shows exceptional electrochemical performance towards glucose oxidation, including excellent selectivity, a low detection limit, good sensitivity, and a wide linear range. Investigation has been conducted on the oxidation of GLS in alkaline solutions with varying concentrations of halide ions such as iodide and chloride. The GLS oxidation peak current increased the performance of a SBAC modified electrode was compared to that of a bare carbon paste electrode (CPE). The role of sensitivity in minimizing halide poisoning is significant. The risk of poisoning is increased if iodide > chloride. As the modified electrode's voltage changes in a chloride solution containing glucose, the peak current gradually reduces. The redesigned electrode that is currently in use as a consequence not only promotes glucose oxidation but also shows strong resistance to electrode poisoning caused by halides. The sensitive and targeted SBAC/CPE has also improved its reliability while evaluating samples of human serum, urine, and breast milk.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call