Abstract
The Polyhydroxyalkanoates (PHAs) are promising biodegradable materials exhibit similar thermal and mechanical properties as conventional plastics. However, the current production cost for PHAs is high and less application examples were found. In addition, the development of electrospun nanofibrous membrane has attracted more attention in recent years. This study aims to investigate the production of PHAs using dyeing wastewater as the carbon source to reduce the major operation cost and prepare Poly(3-hydroxybutyrate) (PHB)-based fibrous membrane with controlled surface microstructure through electrospinning technique. At the optimal Carbon to Nitrogen (C:N) ratio (100:1) by using dyeing wastewater, the reactor achieved 0.2562 g PHAs from unit mass of activated sludge and 0.0571 g PHAs from unit mass of COD consumed. By using industrial glucose as carbon source adjustment, 1.180 g polymer per 1 RMB could be synthesized at the optimal C:N ratio. As a feasible study, the industrial PHB was used for electropining. The influence of the process parameters (applied electric field, solution flow rate and polymer concentration) on the electrospun fiber microstructure was investigated and optimized in order to achieve smooth, bead-free fibers with diameter range of 1 - 10 mm. The morphological transition from bead-like microstructure to smooth fiber was investigated under control of three major process parameters: applied voltage increased from 9 kV to 20 kV, flow rate de-creased from 5 mL.hr-1 to 0.5 mL.hr-1 and polymer concentration increased from 9 wt% to 15 wt%. It was observed that well-defined fibrous film was achieved at applied electric field of 12 kV, flow rate of 1 mL.hr-1 and solution concentration of 14 wt%. The optimally processed electrospun fibers exhibited large area, continuous network with good distribution of fiber diameter distribution. Fibrous membrane fabricated by well-developed electrospinning technique has potentially offered application interest in the design of barrier coatings, adhesive interlayers for biological materials, and membranes for filtration of particulate matters and fiber-based food packaging materials.
Highlights
Polyhydroxybutyrate (PHB) is a biodegradable, biocompatible, and non-toxic biopolymer produced by microbes from soluble substrates and consumed by bacteria as energy storage source under the conditions of excess amount of carbon and nutrient-deficient environment [1] [2] [3]
This study aims to investigate the production of PHAs using dyeing wastewater as the carbon source to reduce the major operation cost and prepare Poly(3-hydroxybutyrate) (PHB)-based fibrous membrane with controlled surface microstructure through electrospinning technique
The morphological transition from bead-like microstructure to smooth fiber was investigated under control of three major process parameters: applied voltage increased from 9 kV to 20 kV, flow rate decreased from 5 mL∙hr−1 to 0.5 mL∙hr−1 and polymer concentration increased from 9 wt% to 15 wt%
Summary
Polyhydroxybutyrate (PHB) is a biodegradable, biocompatible, and non-toxic biopolymer produced by microbes from soluble substrates and consumed by bacteria as energy storage source under the conditions of excess amount of carbon and nutrient-deficient environment [1] [2] [3]. The synthesis of PHB is achieved with a high carbon to nutrient ratio. The biodegradability and nontoxic nature of PHB become more attractive in various medical areas owing to its therapeutic properties [4]. Electrospinning generally affords well-defined fibers with smooth surface. Nanofibers with morphologies such as bead-on-string [6] [7], porous bead [8] [9] [10] [11], and multiple necking structures [12] are of great interest because of their intriguing properties, which are not able to be achieved with fibers in macroscopic scale. The morphological transition of fibrous microstructures is getting considerable attention in the application of medical and environmental areas
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Materials Science and Chemical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
