Synthesis of an Optimal Dynamic Regulator Based on Linear Quadratic Gaussian (LQG) for the Control of the Relative Humidity under Experimental Greenhouse

Abstract

<p><span lang="EN-US">This paper describes one practical approach that suggests a model based technique to control in real time the relative humidity under greenhouse. The humidity level is one of the most difficult environmental factors to be regulated in greenhouse. Moreover, maintaining and correcting for more or less humidity can be a challenge for even the most sophisticated monitoring and control equipment. For these raisons, a Linear Quadratic Gaussian (LQG) controller for relative humidity regulation under greenhouse turns out to be useful. Indeed a LQG controller is proposed for a relative humidity under a greenhouse control task. So, the state space model, which is best fitting the acquired data, was identified using the Numerical Subspace State Space System IDentification (N4SID) algorithm. The mathematical model that is obtained will be used for evaluating the parameters of LQG strategy. The proposed controller is implemented in two steps, in one hand, Kalman filter (KF) is used to develop an observer that estimates the state of relative humidity under greenhouse. In the other hand, the state feedback controller gain is estimated using a linear quadratic criterion function. The suggested optimal implemented controller using Matlab/Simulink environment is applied to an experimental greenhouse. We found, according to the results, that the controller is able to lead the inside relative humidity to the desired value with high accuracy, regardless of the external disturbances.</span></p>