Abstract
AbstractSynthesis of adipic acid (AA) through the oxidation of cyclohexanol and cyclohexanone (K/A oil) with nitric acid was conducted in a capillary microreactor system. Effects of the temperature, the nitric acid concentration, the volumetric flow rate ratio of nitric acid to K/A oil, and the capillary length on the selectivity and the product yield were investigated systematically to achieve optimal reaction conditions. Notably, a high yield of AA (i.e., 90%) was achieved just in 6 seconds at 85°C with the use of 55 wt% nitric acid. Gas components produced in this oxidation process and its total volumetric flow rate were determined under various operational conditions, which was beneficial for reaction mechanism characterization and process optimization. Finally, a kinetic model was established, which was of crucial theoretical significance and practical value for optimizing the reactor design and better understanding such fast and highly exothermic multiphase processes with abundant gas production.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.