Synthesis and use of TMP ester biolubricant derived from cottonseed oil in SI engine

Abstract

PurposeDepleting reserves of crude oils and their adverse environmental effects have shifted focus toward environment friendly and biobased lubricant base oils. Natural oils and fats act as good lubricants but they have low oxidation and thermal stability which makes them unsuitable for modern day uses. This paper aims to produce trimethylolpropane ester biolubricant from cottonseed oil and study the effects of its use in spark ignition (SI) engines.Design/methodology/approachIn this work, cottonseed oil is converted to TMP lubricant by a two-step based catalyzed esterification. The lubricants thermophysical properties are then analyzed and a 20% blend with synthetic poly-alpha olefin is used in an spark ignition engine.FindingsThe produced lubricant has viscosity @100oC of 4.91 cSt, a viscosity index of 230 and a flash point of 202oC. When used as a 20% blend in a petrol engine, the rate of oil deterioration was reduced by 18%, however, the overall wear increased by 6.7%. However, this increase is offset by its improved environmental impacts.Originality/valueIn its current state, such a biolubricant can be used as an additive to most commercially available lubricants to improve oil deterioration characteristics and environmental impact. However, further work on improving biolubricant’s wear characteristics is needed for the complete replacement of mineral oil-based lubricants.