Abstract

AbstractA novel adsorbent material, graphene decorated silane modified layered clays enriched with Fe(III) (TEOS‐g‐LDH−Fe/rGO) was prepared via emulsion polymerization followed by in situ precipitation and its physicochemical characterization carried out by FTIR, XRD, SEM‐EDS, HRTEM, TG‐ DTG, XPS and Raman analysis. The TEOS‐g‐LDH−Fe/rGO composite utilized for the effective removal of As(V) from aqueous system and the process followed via inner‐sphere surface complexation through ligand exchange between hydroxyl groups in TEOS‐g‐LDH−Fe/rGO and As(V) species. The equilibrium data fitted well with Langmuir model and kinetic data with mixed batch model showed remarkable adsorption capacity of 103.91 mg/g at pH 5.5. The synergistic effects associated with precursors in the composite profoundly improved the removal efficiency of As(V). The optimal conditions for As(V) removal was evaluated by RSM coupled with central composite design(CCD) considering pH(3–6), dose(0.5–2.5) and time (1–80 min) at temperature 30 °C. The sorption efficacy of TEOS‐g‐LDH−Fe/rGO was found to be about four times greater than its precursors. In simulated water matrix, the TEOS‐g‐LDH−Fe/rGO exhibit a retention of sorption performance (90 %) from 98.8 % of its initial sorption capacity for As(V) removal during regeneration. This work proves TEOS‐g‐LDHFe/rGO as a promising candidate for addressing grievous environmental threats from arsenic contamination.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.