Abstract
Silica nanoparticles were synthesized by a conventional emulsion polymerization by mixing ethanol, ammonium hydroxide, water and tetra ethyl orthosilicate (TEOS). A new reaction apparatus was assembled for a large scale synthesis of silica nanospheres in the laboratory, which was designed for uniform mixing of the reactants. The apparatus was equipped with a disc type agitator with six rectangular propellers. The new apparatus allowed high reproducibility in terms of the mean size and the size distribution of the silica nanoparticles with the relative standard deviation of less than about 6%. Sedimentation field-flow fractionation (SdFFF) was employed for determination of the size distribution of the silica nanoparticles. SdFFF provided size-based separation of the silica nanoparticles, with the retention time increasing with the size. When SdFFF analysis was repeated three times for the same sample, the standard deviation was less than 4%, showing reliability of SdFFF in size measurement. SdFFF seems to provide more accurate size distribution than DLS, particularly for those having broad and multimodal size distributions. Change in the agitation speed resulted in significant change in the mean diameter of the silica nanoparticles. Agitation speed of 400 rpm in 3 L reaction vessel yielded silica particles of about 100 nm in diameter, while at 200 rpm in 1 L vessel yielded those of about 500 nm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.