Abstract
Polycrystalline bulk samples of ternary carbide Ti3AlC2 ceramics were fabricated by reactively hot-pressing a mixture of Ti, Al, and graphite powders with and without Sn additive. The effects of sintering temperature, time and addition of Sn on the purity, mechanical properties and microstructure of Ti3AlC2 were investigated. The result showed that the TiC content was strongly influenced by sintering temperature for the Ti3AlC2 samples without Sn additive, and the most suitable sintering temperature to create the lowest TiC content was 1400°C. The addition of Sn additive led to a distinct decrease in TiC content. The flexural strength of the testing materials had close relation with the TiC content and sintering time. A certain content of TiC second phase and longer sintering time were helpful to improving the flexural strength. The sample sintered at 1400°C for 2 h possessed the highest flexural strength.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
