Abstract

Highly phosphoric-acid (PA)-doped polybenzimidazole (PBI) membranes exhibit good proton conductivity at high temperatures; however, they suffer from reduced mechanical properties and loss of PA molecules due to the plasticity of PA and the weak interactions between PA and benzimidazoles, especially with the absorption of water. In this work, a series of PBIs with hyperbranched cross-linkers decorated with imidazolium groups (ImOPBI-x, where x is the weight ratio of the hyperbranched cross-linker) as high-temperature proton exchange membranes are designed and synthesized for the first time. We observe how the hyperbranched cross-linkers can endow the membranes with improved oxidative stability and acceptable mechanical performance, and imidazolium groups with strong basicity can stabilize the PA molecules by delocalization and hydrogen bond formation to endow the membranes with an enhanced proton conductivity and a decreased loss of PA molecules. We measured a high proton conductivity of the ImOPBI-x membranes, ranging from 0.058 to 0.089 S cm−1 at 160 °C. In addition, all the ImOPBI-x membranes displayed good mechanical and oxidative properties. At 160 °C, a fuel cell based on the ImOPBI-5 membrane showed a power density of 638 mW cm−2 and good durability under a hydrogen/oxygen atmosphere, indicating its promising use in anhydrous proton exchange membrane applications.

Highlights

  • Since proton exchange membrane fuel cells (PEMFCs) can directly convert the chemical energy of hydrogen to electricity with high efficiency and zero emissions, they have been regarded as one of the most promising power sources [1,2,3,4]

  • Due to the distinct advantages of HT-PEMFCs over traditional LT-PEMFCs, such as enhanced kinetics and high catalyst tolerance to CO produced by steam reforming, the development of HT-PEMFCs has recently attracted widespread attention [5,6,7,8]

  • InIn conclusion, containingdifferent differenthyperbranched hyperbranched cross-linkers decorated with imidazolium groups (ImOPBI-x) were prepared and their performance as HTdecorated with imidazolium groups (ImOPBI-x) were prepared and their performance as HT-PEMFCs

Read more

Summary

Introduction

Since proton exchange membrane fuel cells (PEMFCs) can directly convert the chemical energy of hydrogen to electricity with high efficiency and zero emissions, they have been regarded as one of the most promising power sources [1,2,3,4]. Based on their working temperature, PEMFCs can be divided into high-temperature PEMFCs (HT-PEMFCs) and low-temperature PEMFCs (LT-PEMFCs). The core component of PEMFCs is the polymer electrolyte membrane (PEM).

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call