Abstract
Nanopolymer was developed in order to solve the problem that the micron-scale plugging agent cannot effectively plug nanopores, which leads to instability of the wellbore. The oil-based nano plugging agent poly (MMA-BA-ST) was synthesized by Michael addition reaction using styrene, methyl methacrylate and butyl acrylate compounds as raw materials. Poly (MMA-BA-ST) has a particle size distribution of 43.98–248.80 nm, with an average particle size of 108.70 nm, and can resist high temperatures of up to 364 °C. Poly (MMA-BA-ST) has little effect on the rheological performance parameters of drilling fluids, no significant change in the emulsion breaking voltage, significant improvement in the yield point of drilling fluids and good stability of drilling fluids. The mud cake experiment, and artificial rock properties of poly (MMA-BA-ST), showed that the best-plugging effect was achieved at 0.5% addition, with a mud cake permeability of 6.3 × 10−5 mD, a plugging rate of 72.12%, an artificial core permeability of 4.1 × 10−4 mD and a plugging rate of 88.41%. The nano plugging agent poly (MMA-BA-ST) can enter the nanopore joints under the action of formation pressure to form an effective seal, thus reducing the effect of filtrate intrusion on well wall stability.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
