Synthesis and piezoelectric photocatalytic, mechanical, and electrical properties of porous t-BaTiO3/Ag/β-PVDF composite material

Abstract

Barium titanate (BaTiO3) is a typical perovskite-type oxide with high dielectric constant, low dielectric loss, and excellent ferroelectric, piezoelectric, pyroelectric, and other properties. In view of the low photogenerated electron-hole separation efficiency of T-BT itself, it is proposed to prepare nanocomposites with good catalytic performance by compound modification with Ag. Considering repeated use, on the basis of powder catalysis, a porous block is prepared by compounding powder and organic polymer PVDF. In this study, the t-BaTiO3/Ag/β-PVDF composite material with porosity of ∼70.4% was prepared with the raw material of PVDF and piezoelectric t-BaTiO3/Ag. The mechanical and piezoelectric photocatalytic properties of the composite material was studied systematically. The piezoelectric coefficient d 33 is 1.44 pC/N which can be explained by COMSOL simulation calculation. Moreover, the compressive strength is 1.76 MPa. The degradation MO and RhB results indicated that t-BaTiO3/Ag/β-PVDF composite material had good degradation and cycle stability.