Synthesis and oxygen transport characteristics of dense and porous cerium/gadolinium oxide materials: Interest in membrane reactors

Abstract

Cerium/gadolinium oxide (CGO)-based ceramic ion conductive membranes (CICMs) have potential uses in catalytic membrane reactors (CMRs) and solid oxide fuel cells (SOFCs). A supercritical CO 2 aided sol–gel process allowed the synthesis of CGO materials with the composition Ce 0.9Gd 0.1O 1.95. The produced nanophase powders were non-agglomerated, with a controlled morphology, a high purity and a high specific surface area (>100 m 2/g). The CGO cubic crystalline phase has been obtained at temperatures <300 °C, lower than those of conventional solid state chemistry routes. With respect to ionic oxygen transport, a high conductivity at intermediate temperature (2 × 10 −2 S cm −1 at 600 °C), almost equivalent in dense and porous samples, has been obtained on sintered materials prepared from these powders. In relation to their porosity characteristics, a modelling approach successfully explained the high ionic oxygen transport of some specific porous samples. Future directions for preparing porous conductive ceramics well adapted to CMR or SOFC applications can be anticipated from this model.