Abstract
This study investigates novel vermiculite–calcium chloride composite solid desiccant material for desiccant-assisted evaporative cooling applications. In addition, comparative performance analyses between direct and desiccant-assisted evaporative cooling were performed. According to the study results, temperature drop around 10 ℃ with an average cooling rate of 700 W and coefficient of performance in the range of 5–6 were obtained for both processes. The specific cooling capacity was found 3.5 kJ/g for desiccant assisted and 2.6 kJ/g for direct evaporative cooling process. It was concluded that at low air mass flow rates, performances of both processes are similar whilst at higher air flow rates, desiccant-assisted evaporative cooling becomes more efficient in terms of specific cooling capacity and coefficient of performance. The experiments also showed that vermiculite–calcium chloride provides effective moisture sorption rates above 40% air relative humidity levels. Therefore, this desiccant material could be suitable for desiccant-assisted evaporative cooling applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
