Synthesis and evaluation of Mn–Sn modified Ru–Ir electrode for electrocatalytic treatment of high chloride acrylonitrile wastewater

Abstract

ABSTRACT Acrylonitrile wastewater was an organic wastewater with strong toxicity and poor biodegradability. Therefore, electro-catalytic technology became a promising acrylonitrile wastewater treatment technology because of no secondary pollution, wide application range and low water quality requirements. The optimal Mn-Sn modified Ru-Ir electrode material was synthesized by thermal method and applied in electro-catalytic treatment of acrylonitrile wastewater. The electrode materials were characterized by SEM, TEM, XRD, XPS and electrochemical characterization. SEM, TEM, XRD and XPS indicated that Mn and Sn were capable of incorporating and replacing the part of Ru or Ir and could alter the microstructure of Ru-Ir and the types of Mn and Sn oxides, raising the oxygen evolution potential (OEP) and voltampere charge. When the molar ratio of Mn-Sn was 1:1, OEP, voltampere charge and exchange current density could reach 1.303 V, 1.51 C/cm2 and 6.29×10-4 A/cm2, respectively. The co-doping of Mn-Sn had significant influence on the electrocatalytic performance of Ru-Ir electrode materials. The optimum synthesis conditions of Mn-Sn modified Ru-Ir electrode were as follows: the molar ratio of Mn-Sn was 1:1, calcination time was 4.0 hours, calcination temperature was 450℃, and solvent was water. Under certain conditions, the removal rate of acrylonitrile with Mn-Sn modified Ru-Ir electrode was 100%. Mn-Sn modified Ru-Ir electrode had high oxygen evolution potential and good removal effect of acrylonitrile, which was higher than that of ruthenium iridium electrode and RuO2 electrode.