Synthesis and electrochemical investigation of Cu@FeLn (Eu, Sm, and Gd)-N-C composites for energy conversion and storage applications

Abstract

The slow reaction rates observed in the Oxygen Reduction Reaction (ORR) pose a significant obstacle in advancing fuel cell technology. Consequently, ORR plays a pivotal role in determining the operational efficiency of fuel cell and energy storage systems. Accordingly, the synthesis of a cathodic electrocatalyst with high efficiency has become an attractive topic for researchers. In this empirical study, three trimetallic electrocatalysts are synthesized and electrochemically appraised. By introducing three lanthanides, namely Gadolinium (Gd), Samarium (Sm), and Europium (Eu), into CuFeZIF-8, new composites successfully are synthesized as Cu@FeLn (Eu, Sm, and Gd)-N-C. These functional materials find application in the context of the ORR and supercapacitor technologies. In order to enhance stability, control surface area, and prevent agglomeration during high-temperature pyrolysis, the silicon cover protection technique is employed. The primary objective in this investigation is to assess the influence of mSiO2 coating on the electrochemical parameters of these electrocatalysts. To characterize the fabricated samples, seven characterization tests are utilized. Electrochemical measurements are conducted employing a three-electrode cell configuration within an alkaline environment. The results illustrated that the Cu@FeGd-N-C sample, with an onset potential of -0.043 V vs. Ag/AgCl, exhibited the best ORR performance. Also, the electron transfer number of Cu@FeSm-N-C was computed as 3.56. The half-wave potentials of Cu@FeSm-N-C, Cu@FeEu-N-C, and Cu@FeGd-N-C were found to be -0.34, -0.23, and -0.18 V vs. Ag/AgCl, respectively. A less negative half-wave potential typically suggests superior performance, signifying a lower overpotential requirement for the ORR process. The specific capacitance for Cu@FeGd-N-C electrode at 1 A/g was determined as 144.4 F.g−1. The inclusion of lanthanides, Fe, and Cu into ZIF-8 is observed to notably improve both catalytic activity and electron transfer. Also, the outcomes showed that mesoporous silica-protected pyrolysis could be a useful strategy for improving the efficiency of energy conversion and energy storage equipment.