Abstract
In this paper, a compact microstrip lowpass filter (LPF) is designed, analyzed, simulated, and tested. The proposed design that consists of a basic part in the central section of the structure and two parts of suppression of harmonics that are inserted in the first and last sections of the basic part, have wide-stop band, high suppression factor (−38 dB attenuation level from 2.4 GHz up to 27.4 GHz), low normalized size and sharp roll-off. The proposed LPF has a −3 dB cut-off frequency of 2.4 GHz, a wide stopband bandwidth around 11th harmonic suppression and an insertion loss less than 0.1 dB at passband. This filter has been fabricated and tested and good agreement is observed between the simulated and measured results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: AEU - International Journal of Electronics and Communications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
