Synthesis and characterizations of random copolyamide PA(56-co-66): Excellent toughness and transparency

Abstract

Random copolyamides PA(56-co-66) (coPA-n) with various comonomer compositions were synthesized by a one-pot polycondensation reaction of pentamethyleneammonium adipate (PMA) salt and hexamethyleneammonium adipate (HMA) salt in aqueous solution. All copolymers have high Mn (≥15000 g/mol). The molecular segment composition can be regulated by controlling the feed ratio of PMA salt and HMA salt. Tc and Tm of copolymers obtained by nonisothermal crystallization depend on the composition, showing a clear pseudo-eutectic behavior. Copolyamide coPA-50 exhibits a eutectic phenomenon with the melting point decreasing to a minimum of 218.9 °C. WAXD and SAXS results confirm that the crystalline structure of the copolyamides follows that of the rich component, exhibiting a typical isodimorphic characteristic. Mechanical properties of the copolyamides indicate that the elongation at break could be improved significantly with slight sacrifice of strength, which provides a promising approach for fabricating polyamide materials with desired properties. The tensile strength, tensile modulus, and elongation at break of coPA-50 was 65.2 MPa, 1.0 GPa, and 758.1 %, respectively. These copolymers can be melt-spun into fibers with excellent mechanical properties. Especially, the transmittance of coPA-60 reaches a high value of 88.01 % due to its low crystallinity and small crystal size.