Abstract
Novel polyethersulfone (PES)/poly (vinyl alcohol) (PVA)/titanium dioxide (TiO2) composite nanofiltration membranes were prepared by dip-coating of PES membrane in PVA and TiO2 nanoparticles aqueous solution. Glutaraldehyde (GA) was used as a cross-linker for the composite polymer membrane in order to enhance the chemical, thermal as well as mechanical stabilities. TiO2 nanoparticles with different concentrations (0, 0.05, 0.1, 0.5wt.%) were coated on the surface of PVA/PES composite membrane. The morphological study was investigated by atomic force microscopy (AFM), scanning surface microscopy (SEM) and along with X-ray diffraction (XRD). In addition, the membranes performances, in terms of permeate flux, ion rejection and swelling factor were also investigated. It was found that the increase in TiO2 solution concentration can highly affect the surface morphology and filtration performance of coated membranes. The contact angle measurement and XRD studies indicated that the TiO2 nanoparticles successfully were coated on the surface of PVA/PES composite membranes. However, rougher surface was obtained for membranes by TiO2 coating. The filtration performance data showed that the 0.1wt.% TiO2-modified membrane presents higher performance in terms of flux and NaCl salt rejection. Finally, TiO2 modified membranes demonstrated the lower degree of swelling.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
