Abstract
The study for the extraction of nickel (Ni2+ ions) from aqueous solution by applying surface modified molecularly imprinted ferrite nanomaterials as an adsorbent. Molecularly imprinted ferrite nanoparticles were synthesized by co-precipitation method, using ferrous and ferric salts in basic medium. Silica coating was done by the Stober method followed sol–gel hydrolysis, using precursor TEOS. Use of Trinitrotoluene (TNT) as a catalyst establishes to be necessary to obtain a proper coating. The particle sizes reveal in the range of 20–24nm calculated by X-ray diffraction method, which shows the spinal nature of ferrite nanoparticles. Monodispersity of the nanoparticles was also confirmed due to the size distribution of the particles by SEM analysis. Silica coating functionalization with TEOS and adsorbed peak of Ni(II) ion on the surface of ferrite nanocomposites were confirmed by Energy dispersive X-ray (EDX) spectroscopy. The metal adsorption behavior (Ni2+ ion adsorbed on the surface of silica-coated ferrite nanocomposites) characterized by Fourier Transform Infrared spectroscopy (FT-IR). Magnetic property was studied by VSM and the nanocomposites are found to be superparamagnetic at room temperature. Batch experiment conceded to study the adsorption kinetics and the adsorbent stability in the acidic and basic medium was an accessible mechanism of nickel adsorption by ferrite nanocomposites. Adsorption isotherms were well described by Langmuir equations with maximum adsorption capacity (qm)=2.64mol/g. The adsorption process establishes to be pH dependent (7.6), adsorbent dose (0.2g) and equilibrium could be attained within 15min. All the reaction parameters were considered to complete the adsorption process; it conceded that 94% nickel adsorbed under different optimization conditions. In the study, desorption study, as well as its reusability and recyclability, were accessible indicates that ferrite nanocomposite succeeding adsorption and desorption cycle and retains metal removal capacity until more cycles happened adequately.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
