Abstract

Hydrogel materials are receiving increasing research interest due to their intriguing structures that consist of a crosslinked network of polymer chains with interstitial spaces filled with solvent water. This feature endows the materials with the characteristics of being both wet and soft, making them ideal candidates for electrolyte materials for flexible energy storage devices, such as supercapacitors that are under intensive studies nowadays. In this study, hybrid poly (N, N-dimethylacrylamide) (PDMA) hydrogels were prepared through free radical mechanism. Ammonium persulfate was used as a free radical initiator while sodium montmorillonite was used as a crosslinker. Magnesium trifluoromethanesulfonate (MgTf2) and cobalt oxide (Co3O4) nanoparticles were added to provide the conduction pathway. The synthesized hydrogels were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), thermogravimetric analysis (TGA), and field emission scanning electron microscopy (FESEM). The presence of Co3O4 nanoparticles in the hybrid hydrogel was confirmed using energy dispersive X-ray spectroscopy (EDX). The ionic conductivity study was performed using electrochemical impedance spectroscopy (EIS). The ionic conductivity study revealed that hydrogel containing MgTf2 and Co3O4 nanoparticles (DMA3) has the highest ambient ionic conductivity (9.4 × 10−3 S cm−1, respectively), dielectric permittivity, and lowest activation energy (0.094 eV). Transference number of hydrogel electrolyte was measured which described the movement of ions due to the presence of salt ions and nanoparticles. Furthermore, electrochemical performance of the synthesized hydrogels in electric double layer capacitor (EDLC) was examined using activated carbon electrode. The electrochemical studies such as cyclic voltammetry (CV) and galvanic charge-discharge (GCD) revealed that hydrogel containing MgTf2 and Co3O4 nanoparticles (DMA3) hydrogel showed maximum specific capacitance of 26.1 F g−1 at 3 mV s−1 and 29.48 F g−1 at 30 mA g−1, respectively. Additionally, it was able to withstand 97.4% of capacitance from its initial capacitance value over 8000 cycles at a current density of 200 mA g−1. The fabricated device revealed the successful light up of light emitting diode (LED). Hence, it can be said that the synthesized hydrogel electrolyte has significant potential for smart, light weight, and flexible electronic devices.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call