Abstract
Phenol formaldehyde foams, extensively utilized in wide range of applications face challenges due to depleting petroleum resources and adverse environmental concerns. This study explores a promising shift to biobased alternatives, specifically investigating the use of Kraft lignin (KL) by replacing about 10 to 50% phenol content to synthesize open-cell hydrophilic phenolic foams. The produced foams undergo comprehensive testing to evaluate wetting properties, porosity, mechanical strength, and biodegradation potential. Remarkably, foams with a high percentage of Kraft lignin exhibit outstanding physical and wetting characteristics. Notably, substituting 50% of phenol with KL gave rise to a foam with a density of 40 kg/m3, open cell porosity of about 100%, water absorption capacity of 2100%, and an average water uptake rate of 0.9 cm3/s. Furthermore, these lignin-substituted foams display enhanced biodegradability compared with their petroleum-based counterparts. The foam with the 40% phenol substitution exhibits the highest weight loss of approximately 68% in 15 days during the biodegradation test. The biodegradation was further confirmed using scanning electron microscopy and FT-IR analysis of the degraded samples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.