Abstract
Precise control of composition and microstructure is critical for the production of (BaxSr1−x)Ti1+yO3+z (BST) dielectric thin films with the large dependence of permittivity on electric field, low losses, and high electrical breakdown fields that are required for successful integration of BST into tunable high frequency devices. Here we review recent results on composition-microstructure-electrical property relationships of polycrystalline BST films produced by magnetron sputter deposition, that are appropriate for microwave devices such as phase shifters. Films with controlled compositions were grown from a stoichiometric Ba0.5Sr0.5TiO3 target by control of the background processing gas pressure. It was determined that the (Ba+Sr)/Ti ratios of these BST films could be adjusted from 0.73 to 0.98 by changing the total (Ar+O2) process pressure, while the O2/Ar ratio did not strongly affect the metal ion composition. Film crystalline structure and dielectric properties as a function of the (Ba+Sr)/Ti ratio are discussed. Optimized BST layers yielded capacitors with low dielectric losses (0.0047), among the best reported for sputtered BST, while still maintaining tunabili-ties suitable for device applications. These BST films were used to produce distributed-cir-cuit phase-shifters, using a discrete periodic loading of a coplanar waveguide with integrated BST varactors on high-resistivity silicon. Phase shifters yielding 30 degrees of phase shift per dB of insertion loss were demonstrated at 20GHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have