Synthesis and characterization of aluminum oxide nanoparticles (Al2O3‐NPs) and analysis of their antimicrobial efficacy against selected pathogenic microbes

Abstract

AbstractThis present paper assesses the chemical synthesis of aluminum oxide nanoparticles (Al2O3‐NPs) using a modified sol–gel process. Aluminum nitrate and citric acid were heated to 180 °C until a gel was produced. After that, the dehydrated amorphous gel was sintered at 800 °C for 2 h. The formation of nano‐sized α‐Al2O3 particles was investigated using several characterized methodologies, encompassing Fourier transform infrared spectroscopy, X‐ray diffraction (XRD), dynamic light scattering, and X‐ray fluorescence (XRF). Then, the antibacterial and antifungal activity of synthesized nanoscale Al2O3 particles against pathogens like Escherichia coli, Staphylococcus aureus, and Trichophyton rubrum has been investigated. The successful synthesis of alumina nanoparticles has been validated by several analytical techniques. Nanoparticles of Al2O3‐NPs with a rhombohedral structure and an average crystallite size of 26 nm were revealed by XRD research. Their zeta potential was −8.65 mV, and their size distribution measured 68.6 nm in diameter. The elemental composition of sample was identified with the use of XRF, which indicates that the Al2O3‐NPs powder is quite pure. Furthermore, the antimicrobial experiment showed that the Al2O3‐NPs exhibited the greatest antibacterial efficacy, S. aureus, E. Coli, and T. rubrum exhibited significant inhibition zones with diameters of 13, and 15 mm, and a high inhibition percentage of 70% when exposed to 100 mg/mL of Al2O3 nanoparticles.