Abstract
The performance of γ-Fe2O3 as sorbent for H2S removal at low temperatures (20–80 °C) was investigated. First, γ-Fe2O3/SiO2 sorbents with a three-dimensionally ordered macropores (3DOM) structure were successfully prepared by a colloidal crystal templating method. Then, the performance of the γ-Fe2O3-based material, e.g., reference γ-Fe2O3 and 3DOM γ-Fe2O3/SiO2 sorbents, for H2S capture was compared with that of α-Fe2O3 and the commercial sorbent HXT-1 (amorphous hydrated iron oxide). The results show that γ-Fe2O3 has an enhanced activity compared to that of HXT-1 for H2S capture at temperatures over 60 °C, whereas α-Fe2O3 has little activity. Because of the large surface area, high porosity, and nanosized active particles, 3DOM γ-Fe2O3/SiO2 sorbent shows the best performance in terms of sulfur capacity and utilization. Moreover, it was found that moist conditions favor H2S removal. Furthermore, it was found that the conventional regeneration method with air at high temperature was not ideal for the composite regeneration because of the transmission of some amount of γ-Fe2O3 to α-Fe2O3. However, simultaneous regeneration by adding oxygen in the feed stream allowed the breakthrough sulfur capacity of FS-8 to increase up to 79.1%, which was two times the value when there was no O2 in the feed stream.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
